| . |
| Bluestone |
 | |  | |  | |  | |  | |  | |  | |  | |  | |  |
| Dimensional Cut Bluestone Natural Cleft Standard specifications are as follows : All sizes are nominal 1/2" Under size From 12" x 12" up to 36" x 36" 1/2" runs 3/8" - 3/4" 1" runs 3/4" - 1 1/4" 1 1/2" runs 1 1/4" - 2 1/4" 2 1/2" runs 2 1/4" - 4" Colors available are: Full color Blue Green/browns Lilac |
| Blue Natural Cleft |
| Full Color Natural Cleft |
| Honed 2" Blue Slabs |
Irregular Bluestone Flagstone Full Color is the readily available color . Blue & Lilac can sometimes have long lead times . From 12" x 12" up to 36" x 36" 1/2" runs 3/8" - 3/4" 1" runs 3/4" - 1 1/4" 1 1/2" runs 1 1/4" - 2 1/4" 2 1/2" runs 2 1/4" - 4" Colors available are: Full color Blue Lilac |
| Variegated Treads |
| Green Treads |
| Bluestone Treads Treads are all + or - 1/8" In thickness and are available in the following standard widths : 6" , 8" ,10" , 12" , 14" , 16" , 18", 20" & 24" Standard Thicknesses are 1 1/2" & 2" Lengths are full and half sizes From : 4' up to 8' Note: Stock Pallets are mixed lengths on a pallet |
Thermal Slabs And Natural Bluestone Cutting Stock Natural cleft stock can have long lead times .Mostly available in 1" , 1 1/2" , 2" and 3" . Natural cleft cutting stock can have + or - up to an 1" variance in thickness . Premier Bluestone slabs are available in just about any thickness you could want from 1" up to 12" thick and run in widths from 38" to 59" We offer this material in three finishes . Thermal , Honed and Polished |
| Bluestone Nursery Steps 6" Thick 16" -24" wide Snapped 1 Long 2 Short available in : 3',4' & 5' Lengths 6' and 8' available in thermal ends or Rock faced only |
| Blue Treads |
Blue Thermal Pattern
Variegated Thermal Pattern
| Natural Cleft Material |
| Natural Cleft Material |
| Thermal Material |
| Thermal Pattern Thermal Pattern and special cut to size orders are available in 4 colors . Blue Variegated Green/brown (limited in sizing) lilac Thermal pattern is cut all 6 sides with 1 face thermal finish . All pattern is cut nominal 1/2" under to allow for grout joint . Tolerances are + or - 3/16" in thickness & dimension. If your project calls for hand tight joint you must use the Architectural Grade paving . Also special cut to size orders are used from this grade of material as well . |
(click above link)
(click above link)
(click above link)